|
The
Send Guard for Fax, type SG/FAX-2000, is a
complete security system for full
control of outgoing fax messages.
The Send Guard controls that the fax message
reaches the desired fax machine.
If
a non-desired fax machine is reached it will
be disconnected before any message
leaves the sending fax machine and an acoustical
alarm will sound.
The Send Guard is easily installed between
the telephone-line and the fax machine
or fax modem. It operates with all existing
fax machines of group 3 type.
The Send Guard is connected to the sending
fax machine only; the receiving fax
machine does not need any extra equipment.
The
Send Guard automatically learns the connections
needed to be controlled.
All fax messages will be clearly marked with
the text: Transmission controlled.
Technical Data:
Communication: According to CCITT
group 3,T30.
Synchronous speed: 2400, 4800, 7200,
9600 bit/sek.
Indication of status: alfanum. Display
2 x16 characters.
Electrical Interface: telephone-line.
Number of controlled fax machines: 100.
Security Control:
Dialed phone number and received Identification
from the actual fax machine on the
receiving side are controlled and compared with
stored information in the Send
Guard
General Data:
Temperature range operating: 0
to 50 gC.
Temperature range storage: 20
to 60 gC.
Power requirements: 240/115
Volt 50/60Hz.
Dimensions: (H x W x D): 80x275x280
mm.
Net weight: 3.0
kg.
Case: metal.
Other fax security products:
Automatic fax ID control: IDF-2000.
Fax encryption system: SLF-2000.
Smart cards: SCA-2000.
Keyloader Stationary: KLS-2000.
Keyloader Portable: KLP-2000.
Fax memory for receiving: MEM-2000.
Fax communication monitoring: FDA-96.
|
